Up shopblog original Prev Next Slideshow

Previous image Next image Index page
IMG_0045
IMG_0050
IMG_0052
IMG_0053
IMG_0054
  IMG_0056b.JPG - I originally didn't plan to put binding on the dezzz. But I changed my mind. It does add a touch of class and some minor amount of edge protection to the instrument. I'm sure I'll regret the hassle later. I made this little set up using a 1/2" router bit and an 3/8" bearing. This makes a binding width of 1/16" which is more than I like, so I build up the bearing diameter to .410" using copper foil tape. The wood piece supports the edge of the instrument (otherwise the arching of the top will cause the side to tip). The set up works really well, and I zip through the cut pretty quickly.  
IMG_0063
IMG_0061
IMG_0064
IMG_0066
IMG_0067

I originally didn't plan to put binding on the dezzz. But I changed my mind. It does add a touch of class and some minor amount of edge protection to the instrument. I'm sure I'll regret the hassle later. I made this little set up using a 1/2" router bit and an 3/8" bearing. This makes a binding width of 1/16" which is more than I like, so I build up the bearing diameter to .410" using copper foil tape. The wood piece supports the edge of the instrument (otherwise the arching of the top will cause the side to tip). The set up works really well, and I zip through the cut pretty quickly.
Total images: 420 | Last update: 3/21/11 11:46 PM | Help